11-30-2012, 11:23 PM
(Este mensaje fue modificado por última vez en: 11-30-2012, 11:29 PM por Edmundo.)
Un amigo acaba de modificar un Samsung, pero su modelo es mas viejo. Voy a checar tu modelo en la base de datos.
Mike:
Falta un paso
1. Ensure that there is no disk in the tray.
2. Switch the player off and then back on. This is necessary to clean-boot the
firmware.
3. Wait until the main menu page appears and the player stops doing
anything.
4. Press the eject button on your remote to open the tray.
5. Press the eject button on your remote to close the tray.
6. As soon as the "No Disk" message appears at the top left corner do the following.
8. Press the STOP button (the square symbol)
9. Enter 76884 on the number pad.
10. The region code "4" should appear at the top left corner of the screen.(this just flashed on then off, so keep an eye on the screen)
11. Enter a "9" to make the player region free.
12. Power down and power up again.
13. Play a foreign DVD to verify the change.
================================================
================================================
Firstly, you must start entering the code just after the "No Disk" message is shown and before the message disappears.
Secondly, the STOP key is part of the code. All six keys must be entered smoothly as "STOP 76884". The entry gets timed out so you can't stop in the middle and restart.
If you don't see the "4" the first time, don't worry. Just start from step 4 again (took me 2 goes to get it, it is all about the timing)
================================================
4 – 7 6 8 8 4
Si no funciona, trata esta secuencia:
The post using STOP 76884 when NO DISC appears didn't work for our Region 4
Blu Ray.
What did work was hitting RETURN 78664. The Region Code 4 appeared in the
top right corner and I had to quickly hit 9 before it disappeared. Took me only
2x to get it working. We can now watch all of our US DVDs here in Australia.
Mike:
Falta un paso
1. Ensure that there is no disk in the tray.
2. Switch the player off and then back on. This is necessary to clean-boot the
firmware.
3. Wait until the main menu page appears and the player stops doing
anything.
4. Press the eject button on your remote to open the tray.
5. Press the eject button on your remote to close the tray.
6. As soon as the "No Disk" message appears at the top left corner do the following.
8. Press the STOP button (the square symbol)
9. Enter 76884 on the number pad.
10. The region code "4" should appear at the top left corner of the screen.(this just flashed on then off, so keep an eye on the screen)
11. Enter a "9" to make the player region free.
12. Power down and power up again.
13. Play a foreign DVD to verify the change.
================================================
================================================
Firstly, you must start entering the code just after the "No Disk" message is shown and before the message disappears.
Secondly, the STOP key is part of the code. All six keys must be entered smoothly as "STOP 76884". The entry gets timed out so you can't stop in the middle and restart.
If you don't see the "4" the first time, don't worry. Just start from step 4 again (took me 2 goes to get it, it is all about the timing)
================================================
4 – 7 6 8 8 4
Si no funciona, trata esta secuencia:
The post using STOP 76884 when NO DISC appears didn't work for our Region 4
Blu Ray.
What did work was hitting RETURN 78664. The Region Code 4 appeared in the
top right corner and I had to quickly hit 9 before it disappeared. Took me only
2x to get it working. We can now watch all of our US DVDs here in Australia.