Subwoofer Polk

[Edmundo]

Necesito una asesoria.

Tengo bocinas Polk satelitales, las cuales tengo conectadas a un subwoofer que tiene las siguientes caracteristicas:

Polk 450
Driver Complement
Subwoofer 1 - 12" Diameter (30.48cm)
Polymer composite driver

Electrical
Overall Frequency Response 25Hz - 160Hz
Lower -3dB Limit 35Hz
Upper -3dB Limit 125Hz
Crossover
(subwoofer) adjustable, 80Hz - 160Hz
Inputs speaker, line, LFE (unfiltered)
Outputs speaker level (high-pass filtered at 80Hz)

Dimensions
Cabinet Size 17-1/2" H x 15-1/8" W x 19" D
(44.45cm H x 38.42cm W x 48.26cm D)
Radiation Pattern direct
Enclosure Type vented

Power Output 150 watts Continuous Average Output
Dynamic Power Output 300 watts
Available in 220V? Yes


Proximamente tendre otro subwoofer con las sig caracteristicas:

Polk 350
Driver Complement
Subwoofer 1 - 10" Diameter (25.40cm)
Polymer composite driver

Electrical
Overall Frequency Response 25Hz - 180Hz
Lower -3dB Limit 38Hz
Upper -3dB Limit 160Hz
Crossover adjustable LPF 60Hz - 160Hz
Inputs speaker, line, LFE (unfiltered)
Outputs speaker level

Dimensions
Cabinet Size 15" H x 13-1/2" W x 18-1/2" D
(38.10cm H x 34.29cm W x 46.99cm D)
Radiation Pattern direct
Enclosure Type Vented, dual flared ports

Power Output 100 watts Continuous Average Output
Dynamic Power Output 200 watts
Available in 220V? Yes


Lo que quiero saber es cual de los 2 me conviene mas utilizar para el .1 o viendolo de otro manera, ¿cual debo usar para conectar mis satelitales frontales?