Donde puedo conseguir portadas?

[Ulises]

y de que tamaño las imprimes, del que te dan en esa web? o las haces + pequeñas, podrías darme la resolución correcta x fas!

Yo solo he sacado una, de un juego de Gamecube que compré en Ebay y no tenia portada,

Esto me sirvio muchisimo:

PARA PREPARAR EL SCAN CON EL EDITOR DE IMÁGEN:

Now select "resize" in the "image" menu. Look for a box with a title "resolution". Set this to 100 pix/cm. Make sure you have checked the box marked "keep aspect ratio". Set the actual print size to 27.5 cm (width) and check the height - as long as it is in the 18 to 19.5 cm range leave it as it is. Click OK. At this point you would be wise to save the image (as a jpeg). Now click on the "adjust" menu ("color" in older versions) and look for "brightness and contrast". Set the brightness to "0" and the contrast to "25" - this will make the covers stand out a lot better. Save and load into your label maker program. You can use MS Word to get accurate results - look here.

If you need to remove blemishes use the "clone" brush which you will find on the toolbar. Set it to a size of between 10 and 20. Right click a similar coloured area on you image and then click on the blemish. The area you right clicked will replace the blemish. This can sometimes be a tricky operation so feel free to query me if you need to do this

NOTE: When printing the labels or covers use a "high" setting for the printer (plain paper) or a "standard" setting for gloss paper. If available, increase the intensity by about 10 also. The reason for this is that the printer will print out lighter than you see on screen - hence the need to darken the image a bit.

LUEGO PARA IMPRIMIRLA BIEN USANDO DOCUMENTO WORD:

I have emailed about 10 people so far with MS Word templates for CD/DVD slicks. Whilst I have no problems with emailing them I thought it might be an idea to explain how to make them. They really are very simple.

For DVD's (Full Size Cases):

The dimensions of a full size DVD case are 27.5 cm x 18.5 cm. All you need to do is go to "page setup" and select the paper size you use (A4, Legal etc..). Then set the margins so that the above dimensions will center on the page. For example, A4 requires the margins to be set to 1.3 cm left and right and 1.15 cm top and bottom. This will give you the "exact" size of the cover.

NOTE: You can't use US Letter size paper for DVD cases (CD cases are okay) because the small margins required are out of the printable range of most printers.